TheSouthEnd.org

<t>40lb power pro is what I have always used on braid dipseys. I don't skimp on test for dipseys there is a lot of force on them especially when a fish is on it. I also run a lot of flasher flies on dipseys so even more stuff hanging off them. If you skimp you'll be running back to the store quickly ...

<t>When Dipsy Divers were invented, I was one of the first people in the Great Lakes to use them - and I've been using them ever since. I'm not saying this is the best way, the only way, just that it's my way. Do it your way if you wish. Fine! I'd like to hear it, if it makes sense, I'll try it. But ...

I would also say don't fish mono on divers out more than 50-60 ft. Use braid or wire because of the no stretch. If you use mono out to far the stretch in the mono will not allow your diver to pop, while with braid and wire a little jerk with the no stretch will pop the diver right away.

Ampere Time from Amazon. Did alot of research and this battery was well reviewed. I have had them since last year and have zero complaints. I bought 2 12v for my 24v system, but you can also buy a single 24 or 36 volt unit.

<t>I stopped by a couple of Lithium Battery places when I was at the ICAST show last month. I told them I wasn't shopping, just wanted some general info. There were a dozen or more battery sellers, none of them were NAME brands like AC Delco, InterState, DieHard, Dura Cell or others and none were ...

<t>Unfortunately, almost all of the lithium cells are Chinese made. There is a guy on Youtube named Will Prowse that does extensive teardowns and testing with some amazing equipment. He has taken many of the Chinese batteries apart and some are quite well made - others not so much. A good point of ...

Maybe these pics will help you. I know it looks like spaghetti back there, but it’s the best I could do.

<t>I agree with Honda Cat. There was a T in the fuel line on my used Lund boat when I bought it. I occasionally experienced fuel shortage on my main motor when I had the kicker hooked up. Marina explained the problem and put in a valve that lets me quickly change over from main to kicker fuel supply ...

<t>Have to agree with what's been said. If there is not a spin on fuel and water separator/filter, I would add one and use those ports. I had earlier just assumed that it would have had one from the factory.<br/>
<br/>
As to what Ltrain said about a servo controlled throttle, it is an amazing ...